Step & Riser Sets Tiles — Sizes, Colours and Coverage
Staircase sets that arrive at the right depth with the nosing already formed, so a flight goes down without site cutting and without a colour break between steps.
- Full body porcelain treads and risers, produced and shade-matched as pairs
- Water absorption Below 0.5%
- Best for: Internal and external staircases, domestic and commercial
Available formats
30 x 120 cm
300 x 1200 mm · 10-12 mm · 4 colours
The standard tread. 300 mm deep suits a going of roughly 290 to 305 mm, which covers most domestic and commercial stairs, and 1200 mm wide covers most flights in one piece. Nosing is formed in production, not ground on site.
30 x 120 cm ›20 x 120 cm
200 x 1200 mm · 10 mm · 3 colours
The matching riser. Covers a rise up to 200 mm and is shade-matched to its tread during production — buying the two separately, or topping up later, is the usual cause of a visible colour change partway down a flight.
20 x 120 cm ›33 x 120 cm
330 x 1200 mm · 12 mm · 2 colours
The deep tread, for stairs with a going of 315 to 335 mm. Public buildings and generous domestic staircases frequently exceed the 300 mm standard, and cutting a narrower tread down to fit destroys the formed nosing.
33 x 120 cm ›Packing and coverage at a glance
Container figures are for a 20-foot full container load and are governed by payload once thickness rises, which is why a thicker tile covers far less ground per box.
| Size | Thickness | Per box | Coverage | Weight | Per 20ft |
|---|---|---|---|---|---|
| 30 x 120 cm | 10-12 mm | 3 pcs | 1.08 m² | 27 kg | 980 m² |
| 20 x 120 cm | 10 mm | 5 pcs | 1.20 m² | 25 kg | 1,050 m² |
| 33 x 120 cm | 12 mm | 3 pcs | 1.19 m² | 32 kg | 920 m² |
Specification
Body
- Full body porcelain treads and risers, produced and shade-matched as pairs
- Water absorption Below 0.5%
- Rectified edges
- Shade and calibre sorted
Surfaces
- Matt bullnose
- Grooved anti-slip (R11)
- Anti-skid textured
Best For
- Internal and external staircases
- domestic and commercial
Supply
- FCL from Mundra / Kandla
- Mixed containers across formats
- OEM sizes and shades
- Single-batch project runs
Frequently asked questions
What is the coverage of one box?
It varies by format — the table above states pieces per box, square metres per box and weight for every size we produce in this body. Use the square metres per box figure to convert your measured area into boxes, then add ten per cent.
Can these be produced in a custom size?
Yes, to OEM order. Custom formats need press tooling, so there is a minimum quantity and a lead time; send us the size you want and we will quote both alongside the unit price.
Are all colours available in all sizes?
The catalogue shows each shade in the formats it is in regular production in. Other combinations can usually be produced to order where the volume supports a dedicated run.
Request Step & Riser Sets pricing
Tell us the formats and shades you need and we will quote per square metre and per container.
Browse the full range
Buying Guides
- Tile Buying Guide
- Full Body vs GVT Tiles
- Step & Riser Tiles Guide
- GVT vs PGVT
- Tile Size Guide
- Laminate Guide
- Porcelain vs Ceramic Tiles
- What Are Vitrified Tiles
- Types of Tiles
- Tile Thickness Guide
- Glossy vs Matte Tiles
- How to Clean Tile Floors
- How to Remove Tile Stains
- How to Fix Cracked Tiles
- How to Clean Marble Floors
- Bathroom Size Guide
- Powder Room Guide