GVT — Glazed Vitrified Tiles — Sizes, Colours and Coverage
High-definition printing on a vitrified body, left matt, satin or textured. This is the range that reproduces marble, timber, stone and concrete convincingly while keeping usable wet grip.
- Vitrified porcelain with a digitally printed design under a matt or textured glaze
- Water absorption Below 0.5%
- Best for: Kitchens, bathrooms, balconies, shops, offices
Available formats
60 x 60 cm
600 x 600 mm · 9 mm · 4 colours
The highest-volume size in the range and the one most decors are produced in first. Matt and textured surfaces here give R10 grip, which is what makes it usable in kitchens and bathrooms as well as living space.
60 x 60 cm ›60 x 120 cm
600 x 1200 mm · 9 mm · 4 colours
Where digital printing starts to pay off properly: at this size a marble decor runs long enough that the veining reads as continuous stone rather than as a repeating pattern.
60 x 120 cm ›80 x 160 cm
800 x 1600 mm · 9 mm · 3 colours
Slab territory. A wall can be two pieces and an open-plan floor needs so few tiles that the joints stop registering. Needs two people, a levelling system and a flat substrate — this is not a format to hand to an inexperienced setter.
80 x 160 cm ›20 x 120 cm
200 x 1200 mm · 9 mm · 4 colours
The timber plank format. Surface texture is registered to the printed grain, so the tile feels like wood under the hand — with none of the swelling, refinishing or water anxiety that real timber brings.
20 x 120 cm ›Packing and coverage at a glance
Container figures are for a 20-foot full container load and are governed by payload once thickness rises, which is why a thicker tile covers far less ground per box.
| Size | Thickness | Per box | Coverage | Weight | Per 20ft |
|---|---|---|---|---|---|
| 60 x 60 cm | 9 mm | 4 pcs | 1.44 m² | 25 kg | 1,280 m² |
| 60 x 120 cm | 9 mm | 2 pcs | 1.44 m² | 27 kg | 1,200 m² |
| 80 x 160 cm | 9 mm | 2 pcs | 2.56 m² | 50 kg | 1,050 m² |
| 20 x 120 cm | 9 mm | 5 pcs | 1.20 m² | 23 kg | 1,150 m² |
Specification
Body
- Vitrified porcelain with a digitally printed design under a matt or textured glaze
- Water absorption Below 0.5%
- Rectified edges
- Shade and calibre sorted
Surfaces
- Matt
- Satin
- Carved / textured
- Sugar finish
Best For
- Kitchens
- bathrooms
- balconies
- shops
- offices
Supply
- FCL from Mundra / Kandla
- Mixed containers across formats
- OEM sizes and shades
- Single-batch project runs
વારંવાર પૂછાતા પ્રશ્નો
What is the coverage of one box?
It varies by format — the table above states pieces per box, square metres per box and weight for every size we produce in this body. Use the square metres per box figure to convert your measured area into boxes, then add ten per cent.
Can these be produced in a custom size?
Yes, to OEM order. Custom formats need press tooling, so there is a minimum quantity and a lead time; send us the size you want and we will quote both alongside the unit price.
Are all colours available in all sizes?
The catalogue shows each shade in the formats it is in regular production in. Other combinations can usually be produced to order where the volume supports a dedicated run.
Request GVT — Glazed Vitrified pricing
Tell us the formats and shades you need and we will quote per square metre and per container.
સંપૂર્ણ શ્રેણી જુઓ
ઉત્પાદન સૂચિ
- ફુલ બોડી વિટ્રિફાઇડ
- GVT ગ્લેઝ્ડ વિટ્રિફાઇડ
- PGVT પોલિશ્ડ ગ્લેઝ્ડ
- ડબલ ચાર્જ્ડ
- સ્ટેપ અને રાઇઝર સેટ
- આઉટડોર અને 20 મિમી પેવર
ખરીદી માર્ગદર્શિકા
- ટાઇલ ખરીદી માર્ગદર્શિકા
- ફુલ બોડી વિરુદ્ધ GVT ટાઇલ્સ
- સ્ટેપ અને રાઇઝર ટાઇલ માર્ગદર્શિકા
- GVT વિરુદ્ધ PGVT
- ટાઇલ સાઇઝ માર્ગદર્શિકા
- લેમિનેટ માર્ગદર્શિકા
- પોર્સેલિન વિરુદ્ધ સિરામિક ટાઇલ્સ
- વિટ્રિફાઇડ ટાઇલ્સ શું છે
- ટાઇલ્સના પ્રકાર
- ટાઇલ જાડાઈ માર્ગદર્શિકા
- ગ્લોસી વિરુદ્ધ મેટ ટાઇલ્સ
- ટાઇલ ફ્લોર કેવી રીતે સાફ કરવું
- ટાઇલના ડાઘ કેવી રીતે દૂર કરવા
- તૂટેલી ટાઇલ કેવી રીતે બદલવી
- માર્બલ ફ્લોર કેવી રીતે સાફ કરવું
- બાથરૂમ સાઇઝ માર્ગદર્શિકા
- પાઉડર રૂમ માર્ગદર્શિકા