Double Charged Vitrified Tiles — Sizes, Colours and Coverage
A decorative layer roughly twenty times deeper than a printed glaze, at around two-thirds the cost of full body. The commercial workhorse for offices, showrooms and corridors.
- A 3-4 mm pigmented layer pressed onto the base body in one press stroke
- Water absorption Below 0.5%
- Best for: Offices, retail floors, schools, lobbies, large residential schemes
Available formats
60 x 60 cm
600 x 600 mm · 9.5 mm · 3 colours
The commercial default. Three to four millimetres of pigmented body under the surface means no traffic line will ever wear through it, and at this size the material cost per square metre is the lowest in the durable ranges.
60 x 60 cm ›80 x 80 cm
800 x 800 mm · 10 mm · 2 colours
Fewer joints across a big commercial floor, which matters both visually and for cleaning — grout lines are what a scrubbing machine struggles with and where a floor first starts to look tired.
80 x 80 cm ›60 x 120 cm
600 x 1200 mm · 10 mm · 2 colours
Large format with commercial-grade wear resistance, for projects that want the uninterrupted look of a big tile without accepting the thin printed surface that usually comes with it.
60 x 120 cm ›Packing and coverage at a glance
Container figures are for a 20-foot full container load and are governed by payload once thickness rises, which is why a thicker tile covers far less ground per box.
| Size | Thickness | Per box | Coverage | Weight | Per 20ft |
|---|---|---|---|---|---|
| 60 x 60 cm | 9.5 mm | 4 pcs | 1.44 m² | 28 kg | 1,200 m² |
| 80 x 80 cm | 10 mm | 2 pcs | 1.28 m² | 27 kg | 1,120 m² |
| 60 x 120 cm | 10 mm | 2 pcs | 1.44 m² | 30 kg | 1,100 m² |
Specification
Body
- A 3-4 mm pigmented layer pressed onto the base body in one press stroke
- Water absorption Below 0.5%
- Rectified edges
- Shade and calibre sorted
Surfaces
- Polished
- Matt
- Honed
- Anti-skid
Best For
- Offices
- retail floors
- schools
- lobbies
- large residential schemes
Supply
- FCL from Mundra / Kandla
- Mixed containers across formats
- OEM sizes and shades
- Single-batch project runs
વારંવાર પૂછાતા પ્રશ્નો
What is the coverage of one box?
It varies by format — the table above states pieces per box, square metres per box and weight for every size we produce in this body. Use the square metres per box figure to convert your measured area into boxes, then add ten per cent.
Can these be produced in a custom size?
Yes, to OEM order. Custom formats need press tooling, so there is a minimum quantity and a lead time; send us the size you want and we will quote both alongside the unit price.
Are all colours available in all sizes?
The catalogue shows each shade in the formats it is in regular production in. Other combinations can usually be produced to order where the volume supports a dedicated run.
Request Double Charged Vitrified pricing
Tell us the formats and shades you need and we will quote per square metre and per container.
સંપૂર્ણ શ્રેણી જુઓ
ખરીદી માર્ગદર્શિકા
- ટાઇલ ખરીદી માર્ગદર્શિકા
- ફુલ બોડી વિરુદ્ધ GVT ટાઇલ્સ
- સ્ટેપ અને રાઇઝર ટાઇલ માર્ગદર્શિકા
- GVT વિરુદ્ધ PGVT
- ટાઇલ સાઇઝ માર્ગદર્શિકા
- લેમિનેટ માર્ગદર્શિકા
- પોર્સેલિન વિરુદ્ધ સિરામિક ટાઇલ્સ
- વિટ્રિફાઇડ ટાઇલ્સ શું છે
- ટાઇલ્સના પ્રકાર
- ટાઇલ જાડાઈ માર્ગદર્શિકા
- ગ્લોસી વિરુદ્ધ મેટ ટાઇલ્સ
- ટાઇલ ફ્લોર કેવી રીતે સાફ કરવું
- ટાઇલના ડાઘ કેવી રીતે દૂર કરવા
- તૂટેલી ટાઇલ કેવી રીતે બદલવી
- માર્બલ ફ્લોર કેવી રીતે સાફ કરવું
- બાથરૂમ સાઇઝ માર્ગદર્શિકા
- પાઉડર રૂમ માર્ગદર્શિકા